T_Trace VIS-NIR: Visible & Near-Infrared Multichannel Process Spectrometer

The T_Trace VIS-NIR is a versatile fiber-coupled industrial spectrometer designed for continuous in-line and on-line control. Thanks to its very wide 400 – 1000 nm spectral band, it combines precision colorimetry and the beginning of the molecular near infrared in a single measurement. Its transmission grism optical architecture, combined with a Sony 2D CMOS sensor and a 3 mm slit, analyzes 1 to 8 optical channels in parallel with no mechanical multiplexing.

Powered directly over USB 3 or through PoE (Power over Ethernet) in GigE, the T_Trace VIS-NIR continuously streams raw spectral matrices to your industrial networks for complete supervision of product quality and process drift.


Key strengths of the optical & industrial architecture

  • Continuous 400 – 1000 nm spectrum: instantly correlates visual appearance criteria (color, gloss, opacity) with physico-chemical parameters (water, sugars, lipids, pigments).
  • Synchronous parallel multichannel (1 to 8 channels): the 3 mm slit simultaneously projects up to 8 distinct fiber beams onto the CMOS sensor. Capture is strictly simultaneous on all channels via the hardware trigger.
  • Interchangeable slits: standard 25 µm slit for a fine resolution < 2.0 nm FWHM, available on request in 70 µm, 100 µm, 150 µm or 200 µm to boost sensitivity on dark flows or highly scattering media.
  • High-dynamic-range Sony 2D CMOS sensor: integrates the Sony IMX676 sensor for excellent linearity, minimal readout noise and uniform response across the entire 400–1000 nm range.
  • Independent factory calibration: each optical channel has its own stored calibration file, which can be checked at any time in SpectroLab.
  • Modular optical connections:
    • Spectrometer input: SMA port (single channel) or high-density FC/APC connector (2 to 8 channel configurations with micrometric factory alignment).
    • Sample side: SMA or FC/PC terminations, compatible with collimated reflectance heads, immersion probes or flow cells.
  • Ruggedized IP54 housing: anodized aluminum chassis optimized for conductive heat dissipation through the metal base plate.

Target industrial applications (VIS-NIR 400 – 1000 nm)

By combining the electronic transitions of the visible with the first vibrational bands of the near infrared, the T_Trace VIS-NIR covers an exceptional range of industrial applications:

  • Food, beverages and vegetable oils:
    • Production and ripening monitoring: correlation between color changes (anthocyanins, chlorophylls, carotenoids) and sugar content (Brix) or acidity.
    • Oil quality and oxidation: continuous spectrophotometric monitoring of peroxide value, free fatty acidity and thermal degradation.
    • Unit sorting of fruits and vegetables: non-destructive detection of internal defects (browning, rot) and ripeness grading on fast conveyors.
  • Biomass, plants & precision agriculture:
    • Vegetation indices & water stress: direct measurement of the red edge (700–750 nm) and calculation of normalized indices (NDVI) to monitor crop health in greenhouses or microalgae cultures in photobioreactors.
    • Dry matter & pigments: simultaneous quantification of chlorophyll content and moisture on pulps and forage.
  • Chemicals, resins and coatings:
    • UV/thermal drying & curing processes: simultaneous monitoring of yellowing (yellowness index) and monomer conversion rate.
    • Multi-point coating uniformity: cross-web profiling on film or paper with 8 distributed fiber heads to check coating color and thickness.
  • Plastic sorting and recycling:
    • Combined identification of the bottle/object color and the polymer resin type in a single high-speed pass (up to 1,800 spectra/s in single-channel mode).

Optical & electronic specifications

Parameter Specification
Spectral range 400 – 1000 nm (VIS-NIR)
Optical sensor Sony 2D CMOS (IMX676)
Slit width (on request) 25 µm (standard), 70 µm, 100 µm, 150 µm or 200 µm
Slit height 3 mm (optimized for 1 to 8 channels)
Optical resolution (FWHM) < 2.0 nm (with standard 25 µm slit)
Number of optical channels 1 to 8 simultaneous channels (no optomechanical multiplexing)
Spectrometer optical input SMA (single channel) / FC/APC (2 to 8 channels)
Measurement-side optical connection SMA or FC/PC of your choice (compatible with collimators & probes)
Communication interfaces USB 3.0 High-Speed or GigE (industrial connector)
Power supply Self-powered via USB 3 or PoE (Power over Ethernet via GigE)
External triggering Hardware trigger input (simultaneous channel synchronization)
External lighting control Control of 1 to 4 T_Light sources via the external T_link box
Protection rating IP54 (anodized aluminum housing)
Mounting & thermal Dissipation through the base plate (conductive steel/aluminum support required)

Acquisition rates (measurement frequencies)

Vertical sub-windowing (ROI) on the CMOS sensor adapts the rate to the number of active channels (typical sampling of 50 lines per fiber):

Configuration Sensor readout mode Maximum theoretical rate* Cumulative rate
Single channel (1 channel) 50 active lines up to 1,800 spectra/s 1,800 spectra/s
Multichannel (8 channels) Full slit (~1,400 lines) up to 80 acquisitions/s 640 spectra/s

* Maximum rate measured for an integration time Tint ≤ 0.5 ms. Under real process conditions, the measurement frequency depends on the light flux and follows F = 1 / max(Tint, Treadout).

In-line integration & measurement accessories

GoyaLab adapts the optical configuration to your production lines and process piping:

  • Optical collimators & non-contact reflection heads: dedicated to appearance and composition measurements above conveyors, metal strips or films.
  • Transmission immersion probes: suited to reaction tanks, bioreactors and fermenters.
  • Flow cells: direct or bypass mounting for continuous industrial liquid flows.
  • T_Light illumination & T_link extension box:
    • Synchronized control of 1 to 4 dual-spectrum T_Light sources (calibrated white LED + near-infrared LED or stabilized halogen).
    • The external T_link box handles the 24 V power supply and acts as an input/output extender slaved to the T_Trace VIS-NIR.

Software ecosystem & industrial chemometrics

  • SpectroLab (included, free, with no license limit): real-time acquisition, reference management, colorimetric conversions and standard exports (.xlsx, .txt, .spc).
  • Complete Python API: easy integration into your automation programs, test benches and custom algorithms.
  • Expert / Capture chemometrics suite:
    • Multidimensional PCA modeling (classification, pass/fail control) and PLS (quantification of multiple constituents).
    • Deployment on a private cloud or on a dedicated local server (on-premise), ensuring the sovereignty of your data.
    • Immediate in-line results in the field for operators with Capture.

💡 Combine color and near infrared on your production lines

Do you have a project that requires real-time control of both the visual appearance and the chemistry of your products?
👉 Talk to our spectral analysis engineers


Interested in this product ? Request a quote

    By submitting this form, I accept the personal data management policy

    Our GoSpectro and GemSpectr apps are available on the stores:

    Available on App Store Available on Google Play