LED Light Source Characterization: Spectral Metrology at Your Fingertips

With LED technology now everywhere, a simple illuminance reading in lux is no longer enough to guarantee the visual quality of a space. Color perception, visual comfort and compliance with lighting standards require a full spectral analysis. The IndiGo LightMeter (400–750 nm) turns your smartphone into a portable photometry lab that instantly qualifies any light source, thanks to its absolute intensity calibration.

IndiGo LightMeter portable spectrometer with a small cosine corrector pointed at an LED panel, showing the spectrum and CRI in the SpectroLight smartphone app

Live spectral characterization of an LED luminaire with the IndiGo LightMeter: spectrum, color temperature (CCT) and CRI displayed in SpectroLight.

Why is spectroscopy essential for LEDs?

Unlike incandescent lamps with their continuous spectrum, most white LEDs rely on conversion (a blue emitting chip combined with yellow/red phosphors). This design creates complex spectral profiles with very sharp peaks:

  • The limits of conventional colorimeter light meters: devices fitted with simple RGB filters introduce significant measurement errors with the narrow peaks of LEDs and cannot reconstruct the actual spectrum.
  • Detection of color drift: spectroscopy precisely quantifies the share of blue light and tracks phosphor degradation over time.
  • Compliance with architectural requirements: only a full-spectrum measurement can validate the extended color rendering indices required in modern specifications.

Lighting metrics measured live with SpectroLight

Paired with the SpectroLight Android app over Bluetooth (BLE), the IndiGo LightMeter automatically calculates all the fundamental lighting quantities from the intensity-corrected spectrum:

Parameter Technical description Application stakes
CCT (correlated color temperature)
(in kelvin, K)
Defines the visual appearance of the source, from warm white (2700 K) to cool white (6500 K). Creating lighting atmospheres, respecting circadian rhythms and compliance of workspaces.
Chromaticity coordinates
(CIE 1931 x,y / CIE 1976 u’,v’)
Exact position of the source’s hue in the standard color space. LED binning control and MacAdam ellipse (SDCM) calculation to avoid hue differences between luminaires.
CRI (Ra)
(color rendering index)
Overall index (out of 100) rating how faithfully the source renders 8 standard pastel colors (R1 to R8). Baseline guarantee for residential and commercial lighting (typically Ra > 80 or Ra > 90).
R9 index
(saturated red)
Specifically rates the rendering of deep red hues, often the weak point of standard white LEDs. Critical for medical settings (surgery, dermatology), museum lighting, food retail and cosmetics.

Designed for on-site inspection

The IndiGo LightMeter makes lighting audits and quality checks outside the lab simple:

  • Built-in cosine corrector: its input optic corrects the angle of incidence up to 70°, ensuring accurate measurements even under highly diffusing luminaires (LED panels, ceiling lights) without strict optical alignment.
  • 100% wireless: no more laptop balanced on a stepladder. Place the IndiGo under the luminaire and trigger the acquisition from your smartphone, with 8 hours of battery life.
  • Instant export: generate measurement reports and export raw data (spectra and coordinates) by email or to the company network, directly from the SpectroLight app.

Use cases and target users

1. Luminaire manufacturers and integrators (R&D / QC)

Check the quality of incoming LED batches, verify color binning, and validate the spectral impact of your diffusers or secondary optics before final assembly.

2. Lighting designers and architects

Verify on site that the installation matches the lighting study exactly. Check the consistency of color temperatures (CCT) from one room to another, and make sure there is no green/magenta drift in your LED strips.

3. Exhibition and retail lighting (museums, stores)

Showcase artworks or merchandise perfectly by precisely measuring the R9 index and the emission spectrum, and avoid photochemical damage from unsuitable radiation.

💡 Want to test your LED luminaires?

The IndiGo LightMeter is the most compact way to bring the power of spectroscopy to your lighting audits.
👉 Contact our team for a technical demonstration or a quote


📄 Learn more: see the full specifications on the IndiGo LightMeter page, or explore its capabilities for horticultural light (PAR) measurement.