T_Trace NIR: Near-Infrared Multichannel Process Spectrometer
The T_Trace NIR is a fiber-coupled industrial spectrometer designed for quantitative analysis and continuous in-line and on-line control. Based on a transmission optical architecture with a proprietary GoyaLab grism optimized for the near infrared (700 – 1100 nm), it uses a high-sensitivity Sony 2D CMOS sensor and a 3 mm high entrance slit to monitor 1 to 8 optical channels simultaneously with no mechanical multiplexing.
Powered directly over USB 3 or through PoE (Power over Ethernet) in GigE, the T_Trace NIR transfers all raw spectral matrices to your plant supervisors, PLCs and chemometric platforms for real-time process control.
Key strengths of the optical & industrial architecture
- True parallel multichannel (1 to 8 channels): the 3 mm slit simultaneously projects up to 8 distinct spectral channels onto the CMOS sensor. Acquisition is perfectly synchronous across all channels thanks to the hardware trigger input.
- Adjustable slit width: standard 25 µm slit for an optical resolution < 2.0 nm FWHM, also available on request in 70 µm, 100 µm, 150 µm or 200 µm to maximize photon throughput on scattering powders or highly absorbing media.
- Optimized Sony NIR CMOS sensor: integrates the Sony IMX676 2D sensor, offering extended dynamic range and very low noise in the 700 – 1100 nm band.
- Per-channel factory calibration: each fiber channel has its own stored spectral calibration profile, which can be checked and verified live in SpectroLab.
- Flexible fiber connections:
- Spectrometer input: standard SMA port (single-channel version) or high-density FC/APC connector (2 to 8 channel configurations with micrometric factory alignment).
- Measurement side: SMA or FC/PC terminations, compatible with reflection collimators, immersion probes and diffuse reflectance probes.
- IP54 industrial design: rugged anodized aluminum housing designed for conductive heat dissipation through the base plate (must be mounted on a conductive metal support).
Target industrial applications (NIR 700 – 1100 nm)
The 700 – 1100 nm spectral region (third and second overtones of C-H, O-H and N-H bonds) combines excellent optical penetration with high sensitivity, ideal for non-destructive testing:
- Food & grain processing:
- Water content and moisture: instant moisture measurement on milk powders, flours, cereals, pasta and pellets at the dryer outlet.
- Fat and protein: continuous quantification of fat and protein content in dairy products, ground meat and vegetable oils.
- Ripeness and sugar (Brix) monitoring: non-destructive measurement of Brix and acidity on fast-moving fruit or juice.
- Pharmaceuticals & dry powders (PAT – process analytical technology):
- Blend uniformity: multi-point monitoring of powder and excipient blending in industrial mixers with 4 to 8 simultaneous fiber channels.
- Granulation and drying end point: fluid-bed monitoring of residual moisture to stop the process at the critical point.
- Authenticity and uniformity control: in-line discrimination of raw materials at reception.
- Chemicals, polymers and plastics processing:
- Polymerization and curing monitoring: real-time detection of the disappearance of C=C double bonds during reactions in reactors or under irradiation.
- High-speed sorting and recycling: identification of the main polymer families (PET, PE, PP, PS) on conveyors at up to 1,800 spectra/s in single-channel mode.
- Coating and varnish thickness: non-contact measurement of coating weight or thickness on continuously moving films or webs.
- Biofuels, petrochemicals & dense liquids:
- Measurement of dissolved water in fuels, solvents and industrial lubricants.
- Ester titration and transesterification control in biodiesel synthesis.
Optical & electronic specifications
| Parameter | Specification |
|---|---|
| Spectral range | 700 – 1100 nm (NIR) |
| Optical sensor | Sony 2D CMOS (IMX676) |
| Slit width (on request) | 25 µm (standard), 70 µm, 100 µm, 150 µm or 200 µm |
| Slit height | 3 mm (optimized for 1 to 8 channels) |
| Optical resolution (FWHM) | < 2.0 nm (with standard 25 µm slit) |
| Number of optical channels | 1 to 8 simultaneous channels (no optomechanical multiplexing) |
| Spectrometer optical input | SMA (single channel) / FC/APC (2 to 8 channels) |
| Measurement-side optical connection | SMA or FC/PC of your choice (compatible with collimators & probes) |
| Communication interfaces | USB 3.0 High-Speed or GigE (industrial connector) |
| Power supply | Self-powered via USB 3 or PoE (Power over Ethernet via GigE) |
| External triggering | Hardware trigger input (simultaneous channel synchronization) |
| External lighting control | Control of 1 to 4 T_Light sources via the external T_link box |
| Protection rating | IP54 (anodized aluminum housing) |
| Mounting & thermal | Dissipation through the base plate (conductive steel/aluminum support required) |
Acquisition rates (measurement frequencies)
Vertical sub-windowing (ROI) on the CMOS sensor adapts the rate to the number of active channels (sampling of 50 lines per fiber):
| Configuration | Sensor readout mode | Maximum theoretical rate* | Cumulative rate |
|---|---|---|---|
| Single channel (1 channel) | 50 active lines | up to 1,800 spectra/s | 1,800 spectra/s |
| Multichannel (8 channels) | Full slit (~1,400 lines) | up to 80 acquisitions/s | 640 spectra/s |
* Maximum rate measured for an integration time Tint ≤ 0.5 ms. Under real process conditions, the measurement frequency depends on the light flux and follows F = 1 / max(Tint, Treadout).
In-line integration & measurement accessories
GoyaLab offers a range of optical accessories suited to the constraints of near-infrared industrial installations:
- Optical collimators & non-contact reflectance heads: ideal for direct inspection above a conveyor or a moving web of material.
- Adjustable-path NIR transmission immersion probes: optimized optical path (1 to 10 mm) for direct analysis in chemical reactors or fermentation tanks.
- Diffuse reflectance probes for powders: designed for non-destructive sampling of compacted powders, grains and powdered solids.
- T_Light NIR illumination & T_link extension box:
- Control of 1 to 4 dedicated T_Light sources (stabilized halogen sources or high-power near-infrared LEDs).
- The T_link box provides the 24 V power relay and synchronized I/O extension with the T_Trace NIR.
Software ecosystem & industrial chemometrics
- SpectroLab (included, free, unlimited deployment): universal acquisition interface, dark/white management, baseline correction and direct export to standard formats (.xlsx, .txt, .spc).
- Complete Python API: automation of acquisition sequences, lighting control and direct integration into plant software architectures.
- Expert / Capture chemometrics suite:
- Development of multi-component quantitative calibrations by PLS regression and compliance classification by PCA.
- SaaS cloud deployment or installation on a dedicated server (on-premise) within the company’s private network.
- Instant on-site prediction with Capture, with no specialized spectroscopy skills required.
💡 Deploy multichannel near-infrared analysis on your process
Want to validate the feasibility of an NIR measurement (water, fat, reaction kinetics) or define the best optical connections for your line?
👉 Contact our application engineering team
Interested in this product ? Request a quote
Application
The applications are unlimited. Today our expertise is focused in particular on the following areas
Optical Filter Characterization
Optical Transmission Measurement of Polymers and Crystals
Translucent Liquid Colorimetry: Transmission Measurement & Industry Scales
Greenhouse PAR Measurement: Control the Light Your Crops Actually Use
LED Light Source Characterization: Spectral Metrology at Your Fingertips
Liquid Analysis in Transmission: Absorbance, OD & Beer-Lambert Law
Education – Research
Advanced Gemology & Optical Metrology
Security Spectroscopy: Advanced Authentication & Traceability

